Welcome to the Lingcheng Electronics website!
Hotline: +86-13014650631 +86-0371-67982058
Welcome to the Lingcheng Electronics website!
Hotline: +86-13014650631 +86-0371-67982058

Drive wheel quenching equipment medium frequency 200KW

If you want to know about our products, please call our company at any time.

Call me:+86-13014650631

+86-13014650631
Product description

    Drive wheel quenching equipment, drive wheel surface quenching equipment, drive wheel surface heat treatment equipment, different names, the same equipment, mainly for the surface heat treatment of the drive wheel, to achieve the purpose of improving the surface hardness of the drive wheel, improve the surface hardness of the drive wheel For the purpose of improving its service life, the general drive wheel surface needs to pass this heat treatment process to achieve the above purpose. For the surface of the drive wheel with a diameter of 500-600mm, we recommend that the intermediate frequency series 200KW can satisfy its purpose. Basic technical requirements! Now take the intermediate frequency 200KW as an example to analyze the drawing equipment for you!

    The above is the photo taken on the surface of the driving wheel when quenching. It is for your reference only. The diameter of this driving wheel is 500mm. We use the medium frequency JZ-200 equipment. The heat treatment effect is very good, and the user is quite satisfied. , to meet the user's process technology requirements, the following take this as an example, to say the selection of the drive wheel surface heat treatment equipment and the process technology and the advantages of the selection advantages: 
First, the drive wheel surface heat treatment quenching equipment selection common sense: 
1 According to the actual diameter of the drive wheel; 
2. According to their own specific technical requirements; 
    take the above drive wheel as an example, the wheel diameter is 500mm, the user's actual technical requirements: quenching hard layer is 4-7mm, quenching hardness is 55 -65 degrees, what are the specific requirements for your workpiece? You can call us directly, we will give you reasonable advice! 
Second, the driving wheel surface heat treatment quenching equipment -200KW technical parameters are as follows:
model Power supply input power IF range Duty rate Input Current Dimensions (mm)
XXZP-200/4 Three-phase four-wire 380V 50-60HZ 200KW 3-4KHZ 100% 300A
530*760*1660
 
Third, the drive wheel surface heat treatment quenching equipment outstanding advantages, the reasons must be: 
1. It uses IGBT as the main component, energy-saving and efficient; 
2. High production cycle, can be used with other mechanical sportsman assembly, high production efficiency; 
3 The heating speed is fast, only a few tens of seconds can be used to complete the surface quenching of a driving wheel; 
4. The safety factor is high, this equipment has over-voltage, over-current and other safety protection to protect your health; 
5 Environmental protection, in line with national environmental standards.
Related Products
Related case
ANY HELP?
Please tell us your needs like production capacity, we have professional engineers to customize the proper production process for you.
     
Zhengzhou Lingcheng Electronic Technology Co., Ltd. @ Copyrights Sitemap